机电控制无级变速器执行机构动态响应特性仿真研究

为研究夹紧力可调的机电控制无级变速器（EMCVT）电控电动执行机构的可靠性，及其速比和从动带轮夹紧力动态响应的影响因素，采用MATLAB/Simulink构建了EMCVT执行机构的动力学模型，设计了针对EMCVT电控电动执行机构的速比和夹紧力闭环控制器。对EMCVT输入转矩突变和目标速比突变两种工况进行了仿真分析，仿真结果表明：速比和从动带轮夹紧力动态响应的超调量和调节时间满足CVT的使用要求，从动带轮夹紧力响应时间小于1s，速比变化率可以达到2；EMCVT速比和从动带轮夹紧力动态响应的主要影响因素是执行电动机的负载和转动方向。     

A broadband filter with two transmission zeros adopting a new design method

A new design method was proposed in this article to insert transmission zeros in the broadband filters. In this method, the coupling line was connected to a certain position on the resonator. And then the coupling strength was adjusted by the connecting position. The open end of the resonator was hung and then the cross‐coupling was introduced to realize transmission zeros. This coupling method could add an adjustable parameter to improve the freedom of design and convenient to insert the transmission zeros. To verify this method, a highly selective coupled‐line microstrip filter with two transmission zeros was designed, fabricated, and measured. The measured results were in good agreement with the simulated ones. The return and insertion losses of the broadband filter were better than 18 and 2 dB, respectively. The relative bandwidth of the filter (FBW) was more than 68%. The rectangular coefficient (30 dB:1 dB) was less than 1.21.     

Hand hygiene and surface cleaning should be paired for prevention of fomite transmission

Touching contaminated surfaces might lead to the spread of pathogens, that is, the fomite transmission route. Although hand- and surface-hygiene practices are potentially important non-pharmaceutical interventions for the fomite route, the two interventions have been mostly studied separately in the literature. In this study, we develop a new conceptual model based on the law of mass action, analyze the temporal diffusion of contaminated surfaces and hands, and verify the model with simulations in an assumed norovirus outbreak in a buffet restaurant. A quantitative hygiene criterion is developed for the required frequency of surface disinfection and hand hygiene to control the fomite transmission in indoor environments. To eliminate surface contaminations, the product of pathogen-removal rates (including hygiene and natural death) on hands and surfaces must be no smaller than that of the human hand and surface contact frequency (ie, the net removal product must be non-negative). When the net removal product is negative, the number of contaminated surfaces and hands would show a logistic growth trend and finally approach the equilibrium. Our approach sheds light into how to optimize the combined use of hand hygiene and environmental decontamination for the best effectiveness under different settings.     

Microwave bandpass filter by feedback interference topology

This paper proposes a signal feedback interference topology to control the characteristics of a coupled line bandpass filter. Control is carried out by varying the ratio of the transmission line parameters of the forward and the feedback couplers. The topology produces a compact filter that does not require a complicated design or fabrication. The results of the insertion and return losses show that the feedback‐controlled design has desirable features in terms of the design frequency, fractional bandwidth, stopband rejection level, roll‐off rate and insertion loss. The test results of the fabricated prototype achieved good agreement with the simulation results of the ideal transmission line design model. Several microwave, modern wireless and mobile/satellite communication systems may benefit from such a filter design due to its compactness and flexibility.     

磁性辊轮驱动装置在切割生产线中的应用

随着汽车及机床行业的发展,板料涂油工艺在汽车零部件生产中应用广泛,从而导致板料在自动切割生产过程中极易打滑跑偏,无法保证传输精度,本文所阐述的磁性辊轮驱动装置从根本上有效解决了此问题,在切割生产线中有广泛的推广价值。     

基于Romax行星齿轮传动振动特性仿真分析

以某行星齿轮传动为研究对象,分析行星齿轮传动原理;建立行星齿轮三维模型,导入仿真软件Romax对行星齿轮传动模态、固定内齿圈振动加速度、振动速度等振动特性进行仿真分析。仿真结果表明:行星齿轮传动不同阶数下的振动频率、振型和振动总位移不同;行星齿轮传动固定内齿圈的振动加速度、振动速度都呈现在某一均值波动的情况。该研究为避免行星齿轮传动发生共振、减小振动噪声及增加疲劳寿命提供理论依据。     

新时期广播电视技术维护工作的特点分析

阐述广播电视技术维护的重要意义,同时从多角度出发,分析新时期广播电视技术维护工作的主要特点。     

冷却塔内气流流场特性研究及应用

冷却塔是火力发电厂循环水系统的重要设备,冷却塔的冷却效率对机组的微增功率有着比较重要的影响,冷却效率的提高有助于节约发电能耗。冷却塔的效率与其空气动力特性有着紧密的联系,本文以华电集团江苏分公司望亭发电有限公司3号机冷却塔的节能改造为例,研究了冷却塔内气流流场的特性,并阐述了针对该特性采取的技术措施在冷却塔优化改造中的应用实践。     

Mullite-bonded SiC-whisker-reinforced SiC matrix composites: Preparation,characterization, and toughening mechanisms

A novel mullite-bonded SiC-whisker-reinforced SiC matrix composite (SiCw/SiC, SiC whisker-to-SiC powder mass ratio of 1:9) was designed and successfully prepared. Before preparing the composite, the inexpensive lab-made SiCw was first modified by an oxidation/leaching process and then coated with Al₂O₃. The kinetics results indicate that the oxidation process can be described by improved shrinking-cylinder models. The aspect ratio of SiCw improved after modification. Subsequently, raw materials with a SiC–SiO₂–Al₂O₃ triple-layered structure were obtained after the Al₂O₃-coating process and used as feedstocks during the subsequent hot-pressing sintering. Finally, the characterization of the composites indicates that the mullite-bonded sample performs better (relative density of 93.8?±?1.4%, flexural strength of 533.3?±?18.2?MPa, fracture toughness of 13.6?±?2.1?MPa?m^1/2, and Vickers hardness of 20.6?±?2.5?GPa) than the reference sample without the mullite interface. The improved toughness could essentially be attributed to the moderately strong interface bonding and effective load transfer effects of the mullite interface.     

对称消声器传递损失测量及误差修正

为了提高对称消声器传递损失的测量效率，基于声学理论分析，提出了一种单负载法传递损失计算模型。针对反射系数较大的吸声末端，导致该方法在实际测量中存在较大误差的问题，推导出了一种能够消除测试管道末端反射声波在上、下游形成多次反射的修正公式。通过自制阻抗管进行试验测试，结果表明：在末端声学负载吸声性能良好的情况下，单负载法传递损失计算模型能够精确计算出对称消声器的传递损失；修正公式能够有效地消除末端负载所引起的反射波对传递损失计算的影响，降低对末端声学负载吸声性能的要求，保证单负载传递损失计算模型的适用性。